EasyManuals Logo

Pentax K10D User Manual

Pentax K10D
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
220
5
Appendix
In rare cases, the camera may not operate correctly due to static
electricity. This can be remedied by taking the batteries out and putting
them back in again. When the mirror remains in the up position, take the
batteries out and put them back in again. Then, turn the power on. The
mirror will retract. After the procedure is done, if the camera operates
correctly, it does not require any repairs.
* Refer to p.11 of the “PENTAX PHOTO Browser 3/PENTAX PHOTO
Laboratory 3 Operating Manual” for details on connecting the camera to a PC.
AE lock
function does
not operate
AE lock is not available
when set to B (Green),
p (Bulb) or M (Flash X-
sync speed) mode
Use AE lock with any setting other than
B
(Green),
p
(Bulb) or
M
(Flash X-sync speed)
mode
.
Flash does not
discharge
Capture mode is set to
B (Green) mode.
Only C (Auto discharge) and D (Auto
flash+Redeye reduct) are available for
Flash Mode when Capture mode is B.
Flash will not discharge when the subject
is bright in these modes. In Capture modes
other than B, only the flash mode that
discharges every time the flash recharges
is available. Try different Capture modes.
USB
connection
with computer
does not work
properly*
The Transfer Mode is
set to [PictBridge]
Set Transfer Mode to [PC].
An error occurred while
sending USB data
Change the Transfer Mode to [PC-F].
USB
connection
with printer
does not work
properly
The Transfer Mode is
set to [PC] or [PC-F]
Set Transfer Mode to [PictBridge]. (p.110)
Shake
Reduction
does not work
Shake Reduction
function is off
Turn on the Shake Reduction switch.
Shake Reduction
function is not set
properly
If a lens for which focal length information
cannot be acquired is used, set the [Focal
Length] on the [Shake Reduction] menu.
(p.69)
Shutter speed is too low
for Shake Reduction
function to be effective
when panning or
shooting night scenes,
etc.
Turn off the Shake Reduction function and
use a tripod.
Subject is too close
Move away from the subject, or turn off the
Shake Reduction function and use a
tripod.
Problem Cause Remedy

Table of Contents

Other manuals for Pentax K10D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax K10D and is the answer not in the manual?

Pentax K10D Specifications

General IconGeneral
Megapixel10.2 MP
Sensor typeCCD
Maximum image resolution3872 x 2592 pixels
InterfaceUSB 2.0
Color depth3x8, 3x12, 3x22 bit
Digital SLRYes
Video capabilityNo
Camera shutter speed1/4000 - 30 s
Compatible operating systemsWindows 2000/XP, Mac OS X 10.2+
Filter size23.5 mm
FocusTTL
Auto focusing (AF) modesCentre weighted Auto Focus
Flash modesAuto
Display diagonal2.5 \
Display resolution (numeric)210000 pixels
USB version2.0
Photo effectsblack&white, Sepia
White balanceauto, Cloudy, daylight, flash, Fluorescent, manual, Shade, Tungsten
Camera playbackSlide show
Self-timer delay2, 12 s
MaterialPolycarbonate
Product colorBlack
Compatible memory cardssd
Light meteringCentre-weighted, Spot
Light exposure modesaperture priority AE, auto, manual, shutter priority AE
Camera shutter typeElectronic
Weight and Dimensions IconWeight and Dimensions
Depth101 mm
Width141.5 mm
Height70 mm
Weight710 g

Related product manuals