Pentax K10D - Page 99

97
3
Basic Operations
When another image is selected with the four-way controller (45), the
image appears in the set filter.
6 Press the 4 button.
The save confirmation screen appears.
7 Use the four-way controller (2)
to select [Save as].
8 Press the 4 button.
The filtered image is saved under a different name.
Filter name Function Front e-dial Rear e-dial
B&W
Converts to a black and white
image. Changes the contrast to
appear as if a B&W color filter
was used.
—BW/R/G/B
Sepia
Adds a vintage touch to photos by
converting them to sepia color.
Selects from three levels of
density.
—
Density
(3 levels)
Color
Adds a color filter to the image.
Selects from 18 filters (6 colors ×
3 tones).
Red/Green/
Blue/Yellow/
Magenta/
Cyan
Density of
each color
(3 levels)
Soft
Creates a soft image by lightly
fading the entire image. Selects
from three levels.
—
Softness
(3 levels)
Slim
Changes the horizontal and
vertical ratio of images. Adjusts
height or width up to two times the
original size.
—
Left: Wide
Right: Slim
Brightness
Changes the brightness of
images. Adjusts in a range of ±8
levels.
—
Left: Dark
Right: Light
Save image as a new file
S a v e i m age a s a ne w f i l e
Cancel
C a n c e l
Save image as a new file
Cancel
Save as
MENU
OK
O K
OK
OK