103
3
Taking Pictures
You can set this function to correct for camera shake when taking still shots. If
Pixel Track SR is set to O (On), the camera automatically corrects for camera
shake in the images you shot. The default setting is P (Off).
1
Use the four-way controller (23) to select [Pixel Track SR] on
the [A Rec. Mode] menu.
2
Use the four-way controller (45) to switch between O (On)
or P (Off).
O(On) Automatically corrects for camera shake.
P (Off) No correction for camera shake.
The setting is saved.
• When the Sensitivity is set to 125 or 200 and Highlight Correction is set to
O (On), the setting changes to 250. The setting returns when Highlight
Correction is set to P (Off).
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.105).
D-Range setting cannot be set in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
Setting Pixel Track SR
Shake Reduction settings in C (Movie) and (Underwater Movie) mode
are configured under Movie SR (p.116).
• Pixel Track SR cannot be set in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
• Pixel Track SR does not function when the flash discharges even if [Pixel
Track SR] is set to O (On).
Pixel Track SR may not be effective when the shutter speed is slow. We
recommend you turn off the [Pixel Track SR] setting P (off) and use a tripod
for slow shutter speeds.
To Next Page
Loading...
Need help?
General
