Pentax Optio WG-2GPS User Manual

188
7
Settings
When you connect the camera to AV equipment with an HDMI cable, set the
appropriate video output resolution for playing back images. The default setting
is [Auto].
1 Use the four-way controller (23) to select [HDMI Out] on the
[W Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23) to select an output format.
Choose the HDMI output format to match the output format of the AV equipment.
4 Press the 4 button.
The setting is saved.
Selecting the HDMI Output Format
The items on the pull-down menu vary depending on the selected Video
output format.
To change the display, set the Video output format before setting the HDMI
output format.
The table below shows the combinations of the Video output format and
HDMI output.
Video output format
NTSC PAL
Resolution
Auto (The largest size that both the TV and
camera support is automatically selected)
1080i (1920×1080i)
720p (1280×720p)
480p (1920×1080i) 576p (720×576p)

Pentax Optio WG-2GPS Specifications

General

Type	Compact
Sensor Type	CMOS
Image Processor	PRIME M
Optical Zoom	5x
Image Stabilization	Sensor-shift Shake Reduction
GPS	Yes
Effective Pixels	16 MP
Lens Focal Length	5.0 - 25.0 mm (28 - 140 mm in 35mm equivalent)
Video Resolution	Full HD 1920 x 1080
Waterproof	Yes, up to 12m
Shockproof	Yes (up to 1.5m/5ft)
Coldproof	Yes, up to -10°C (14°F)
Crushproof	Yes (up to 100kgf)
Battery Type	D-LI92 rechargeable lithium-ion battery
Dimensions	122.5 x 61.5 x 29.5 mm (4.8 x 2.4 x 1.2 in)
Weight	194 g (6.8 oz) (including battery and memory card)