Pentax Optio WG-2GPS - Resetting to Default Settings (Reset); Setting the Startup Shortcut

194
7
Settings
You can reset the camera settings to their defaults. Refer to “Default Settings”
(p.227) for the reset settings.
1 Use the four-way controller (23) to select [Reset] on the
[W Setting] menu.
2 Press the four-way controller (5).
The [Reset] screen appears.
3 Use the four-way controller (2) to
select [Reset].
4 Press the 4 button.
The settings return to the defaults.
You can start a function by pressing a button other than power switch when the
camera is off.
1 Use the four-way controller (23) to select [Startup Shortcut]
on the [W Setting] menu.
2 Press the four-way controller (5).
The [Startup Shortcut] screen appears.
Resetting to Default Settings (Reset)
Setting the Startup Shortcut
Playback Mode When [Playback Mode] is on, you can turn on the camera by
pressing and holding down the Q button.
LED Lighting When [LED Lighting] is on, you can turn on the LED Macro
Lights by pressing and holding down the Green button.
Clock Display When [Clock Display] is on, you can display the clock on the
display by pressing and holding down the 4 button.
OK
OK
Reset
Returns to default
settings
Reset
Cancel