Pentax Optio WG-2GPS - Adding a Frame (Frame Composite)

153
5
Editing and Printing
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
4 Use the four-way controller (23) to select [Overwrite] or
[Save as].
5 Press the 4 button.
The edited image is saved.
This function lets you add a decorative frame to still pictures. There are 6 frames
already stored in the camera. You can copy the optional frames from the CD-
ROM supplied with the camera.
1 Enter Q mode and use the four-way controller (45) to
choose the image to which you want to add a frame.
2 Use the four-way controller (2345) to select N (Frame
Composite) from the Playback Mode Palette.
3 Press the 4 button.
The 12-frame display of the frame selection screen appears.
4 Use the four-way controller
(2345) to choose a frame.
Adding a Frame (Frame Composite)
N (Frame Composite) cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or (Report) modes
• Images taken with the recorded pixels of , l, or m
An error message appears in step 3.
OK
OK
OK
OK