120
3
Taking Pictures
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the camera
is turned off.
For some camera settings, the Memory function is always set to
O
(On) (the settings
are saved when the camera is turned off), while for others you can choose on or off
(to choose whether the settings are saved or not when the camera is turned off). The
items which can be set to
O
or
P
(Off)
in the Memory function are shown in the table
below. (Items not listed here are always saved in the selected settings when the
camera is turned off.)
If you select
O
, the settings will be saved in the status they were in immediately before the
camera was turned off. If you select
P
, the settings will be reset to the defaults when the
camera is turned off. The table below also shows whether the Memory default setting for
each item is
O
or
P
.
Item Description
Default
setting
Page
Face Detection
A Face Detection mode set by using the I
button.
P p.69
Flash Mode
The flash mode set with the four-way
controller (4)
O p.90
Drive Mode
The drive mode set with the four-way
controller (2)
P
p.81 -
p.84
Focus Mode
The focus mode set with the four-way
controller (5)
P p.91
Zoom Position The zoom position set with the W/T button. P p.63
MF Position
The manual focus position set with the four-
way controller (23)
P p.92
White Balance
The [White Balance] setting on the
[A Rec. Mode] menu
P p.98
Sensitivity
The [Sensitivity] setting on the
[A Rec. Mode] menu
P p.100
EV Compensation
The [EV Compensation] setting on the
[A Rec. Mode] menu
P p.101
AE Metering
The [AE Metering] setting on the
[A Rec. Mode] menu
P p.99
Digital Zoom
The [Digital Zoom] setting on the
[A Rec. Mode] menu
O p.65
DISPLAY
The information display mode set with the
4/W button
P p.25
File No.
If a new SD Memory Card is inserted when
set to O (On), file numbers are assigned
sequentially.
O ⎯
To Next Page
Loading...
Need help?
General
