Pentax Optio WG-2GPS - Common Operations; Understanding the Button Functions; A Mode

48
2
Common Operations
Understanding the Button Functions
1 Power switch
Turns the camera on and off (p.41).
2 Shutter release button
Focuses the camera on the subject when pressed halfway in Still Picture
Capture Mode (except when the focus mode is set to 3, s, and \) (p.61).
Takes a still picture when pressed down fully (p.61).
Pressing down fully starts and stops movie recording in C (Movie),
(Underwater Movie), and (High Speed Movie) modes (p.111, p.113).
Pressing down fully starts and stops sound file recording in O (Voice Recording)
mode (p.169).
3 W/T button
Changes the captured area (p.63).
4 Q button
Switches to the Q mode (p.52).
5 Four-way controller
(2) : Changes the drive mode (p.81 - p.84).
(3) : Displays the Capture Mode Palette (p.67).
(4) : Changes the flash mode (p.90).
(5) : Changes the focus mode (p.91).
(23) : Adjusts the focus when the focus mode is set to \ (p.92).
A Mode
2Common Op erations
2
4
8
6
9
5
3
1
7