101
3
Taking Pictures
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 125-200, 125-400, 125-800, 125-1600, 125-3200, 125-
6400.
1
Use the four-way controller (23) to select [AUTO ISO Range]
on the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the sensitivity
adjustment range.
4
Press the 4 button.
The setting is saved.
For adjusting the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1
Use the four-way controller (23) to select [EV
Compensation] on the [A Rec. Mode] menu.
• The sensitivity cannot be selected in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
• When the shooting mode is set to (Report), the AUTO is fixed at 125-
6400. Other sensitivities can also be selected.
• When [Pixel Track SR] is set to O (On), 3200/6400 cannot be selected.
• When the sensitivity is set to 125 and Highlight Correction is set to O (On),
the setting changes to 250 (200 cannot be selected).The setting returns
when Highlight Correction is set to P (Off).
Saving the Sensitivity setting 1p.120
Setting AUTO ISO Range
• AUTO ISO Range cannot be selected in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
• When [Pixel Track SR] is set to O (On), 125-3200 and 125-6400 cannot be
selected.
Setting the Exposure (EV Compensation)
To Next Page
Loading...
Need help?
General
