Pentax Optio WG-2GPS - Core Camera Operations; Understanding Camera Controls and Displays

46
1
Getting Started
Set the current date and time and the display format.
1 Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2 Use the four-way controller (23)
to choose the date and time
display format.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/
mm/dd].
3 Press the four-way controller (5).
The frame moves to [24h].
4 Use the four-way controller (23) to select [24h] (24-hour
display) or [12h] (12-hour display).
5 Press the four-way controller (5).
The frame returns to [Date Format].
6 Press the four-way controller (3).
The frame moves to [Date].
7 Press the four-way controller (5).
The frame moves to the month.
8 Use the four-way controller (23) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in step 4, the setting switches between am and pm
corresponding to the time.
9 Press the four-way controller (3) to select [Settings
complete].
10 Press the 4 button.
This confirms the date and time.
Setting the Date and Time
If you press the 4 button in step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time signal (on
the TV, radio, etc.) reaches 00 seconds.
MENU
mm/dd/yy 24 h
00:00
Cancel
Settings complete
Date Adjustment
Date Format
Date
Time
01/01/2012