207
8
Connecting to a Computer
1
Click the [Safely Remove
Hardware] icon in the task bar.
2
Click [Eject xxx (name of the
camera)].
A message appears indicating that the
hardware can be safely removed.
3
Disconnect the USB cable from
your Windows PC and the camera.
Disconnecting the Camera from Your Windows PC
• If the camera (removable disk) is being used by an application such as
“MediaImpression 3.5 for PENTAX”, the camera cannot be disconnected
until the application is closed.
• The camera will automatically switch to the playback mode when the USB
cable is disconnected from your Windows PC or the camera.
To Next Page
Loading...
