85
3
Taking Pictures
In X (Digital Wide) mode, you can stitch two vertical images captured with this
camera into a single frame up to approx. 21 mm coverage (35 mm film
equivalent).
1
Use the four-way controller (2345) to select X (Digital
Wide) from the Capture Mode Palette.
2
Press the 4 button.
The camera enters X mode.
Turn the camera 90° clockwise and align your first
picture.
When the camera detects a person’s face, the
Face Detection function is activated and the face
detection frame appears (p.69).
Using the Digital Wide Function (Digital Wide
Mode)
+
1
38
To Next Page
Loading...
