202
8
Connecting to a Computer
Set the device to which the camera is connected with the USB cable.
1
Turn your camera on.
2
Use the four-way controller (23) to select [USB Connection]
on the [W Setting] menu.
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select [MSC].
5
Press the 4 button.
The setting is saved.
Setting the USB Connection Mode
Make sure to set the USB connection mode before connecting your camera
to the computer. You cannot perform the following setting if the camera is
already connected to your computer with the USB cable.
Proceed to the following pages depending on your computer.
Connecting to a Windows PC 1 p.204
Connecting to a Macintosh 1 p.212
MENU
PTP
Ey
e
-
Fi
OK
MSC
IMGP
OK
Cancel
Folder Name
File Name
USB Connection
Video Out
HDMI Out Auto
Date
2/4
Setting
To Next Page
Loading...
Need help?
General
