180
7
Settings
The Clock display appears and the alarm rings
for one minute when the set time is reached
while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
The date and time selected in “Setting the Date and Time” (p.46) and “Changing
the Date and Time” (p.176) serve as the W ( Hometown) date and time. By using
the world time function, you can display the time in a city other than the Hometown
(X Destination). This is useful when taking pictures in a different time zone.
1
Use the four-way controller (23) to select [World Time] on
the [W Setting] menu.
2
Press the four-way controller
(5).
The [World Time] screen appears.
3
Use the four-way controller (23) to select X (Destination).
4
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected blinks on
the map.
Turning the Alarm Off
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, the alarm will not ring while interval shooting is being
performed.
Setting the World Time
To Set the Destination
MENU
World Time
Hometown
New York
Destination
New York
14:25
14:25
Select Time
DST
OFF
To Next Page
Loading...
Need help?
General
