Pentax Optio WG-2GPS - Setting the Shooting Functions; Setting the Rec. Mode Menu

89
3
Taking Pictures
Setting the Shooting Functions
Settings for shooting are mostly set from the [A Rec. Mode] menu. Refer to
explanations for each function on how to make these settings.
1 Press the 3 button in Still Picture Capture Mode.
The [A Rec. Mode] menu appears.
Pressing the 3 button in C (Movie), (Underwater Movie), (High
Speed Movie) and (Interval Movie) modes displays the [C Movie] menu.
2 Use the four-way controller (2345) to select an item and
set it up.
3 After setting, press the 3 button.
The camera returns to capture status.
The setting is saved and the camera returns to the previous screen.
3 Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
3 Press the Q button.
When the [A Rec.Mode] , [C Movie] or [W Setting] menu is displayed from
A mode, the setting is saved and the camera returns to playback mode.
3 Press the 3 button.
The changes are canceled and you can select a menu.
Setting the Rec. Mode Menu
To Finish the Setting
To Save the Setting and Start Taking Pictures
When the [W Setting] menu is displayed from Q mode, you can switch to
A mode by pressing the Q button.
To Save the Setting and Start Playback of Images
To Cancel the Changes and Continue with Menu Operations