156
5
Editing and Printing
The frames downloaded from the PENTAX website or other source can be used
for adding a frame to pictures.
You can overlay your original frame (decorative frame) on still pictures. You can
select the type and color of an original frame and its position.Text can also be
entered.
Frame
Text Stamp
To Use a New Frame
• Extract the downloaded frame and copy it to the FRAME folder in the built-
in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted with
this camera.
• For more information on downloading, refer to the PENTAX website.
Overlaying Your Original Frame on Still Pictures
Type of original
frame
Blur/Edge Composite
Frame Type
F (All sides)/G (Upper and lower sides)/H (Right and left sides)/
I (Upper side)/J (Lower side)/K (Left side)/L (Right side)
Color White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Available
characters
A – Z, a – z, 0 – 9, Symbols
Display Position
M (Upper-left)/N (Upper-center)/O (Upper-right)/P (Lower-left)/
Q (Lower-center)/R (Lower-right)
Color White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
The Original Frame function cannot be used on images taken at F (Digital
Panorama) or (Report) modes, images taken with the recorded pixels of
/h/h/l/m or movies. An error message appears in Step 3.
To Next Page
Loading...
Need help?
General
