Pentax Optio WG-2GPS - Red-Eye Compensation

152
5
Editing and Printing
19 Press the 9 button.
Returns to the item selection screen.
20 Use the four-way controller (23)
to select [Create an image].
21 Press the 4 button.
A confirmation dialog for saving the image appears.
22 Use the four-way controller (2) to select [Save].
23 Press the 4 button.
The edited image is saved.
You can correct images where the flash has caused the subject to appear with
red eyes.
1 Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
2 Use the four-way controller (2345) to select Z (Red-eye
Compensation) from the Playback Mode Palette.
3 Press the 4 button.
Saving the Edited Image
The quality level of the image is fixed at C (Best).
Red-eye Compensation
• The red-eye compensation function cannot be used on images taken at
F (Digital Panorama), movies or on images where red eyes cannot be
detected on the camera. An error message appears in step 3.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
MENU
Recorded Pixels
3 M
Create an image
Layout
Select image(s)
Backgnd.
OK
OK