218
8
Connecting to a Computer
Transferring Images Using an Eye-Fi
Card
You can automatically transfer images or movies to a computer or similar devices
via wireless LAN using a memory card that is equipped with the wireless LAN
(Eye-Fi card) function.
1
Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual supplied with
the Eye-Fi card.
2
Turn the camera off.
3
Insert the Eye-Fi card that has been set up.
4
Turn the camera on.
5
Set [Eye-Fi] in the [W Setting] menu to O (On).
The images are transferred automatically. For details on how to set up the
camera, refer to “Setting the Eye-Fi Communication” (p.189).
The following icons appear on the display.
During Eye-Fi communication. The camera is communicating or
searching for the access point when [Eye-Fi] is set to O (On).
Eye-Fi communication waiting. The camera is not communicating
when [Eye-Fi] is set to O (On).
Eye-Fi communication prohibited. When [Eye-Fi] is set to P (Off).
Eye-Fi version error. Version of the Eye-Fi card is out of date or the
card is write-protected.
• Not available for Endless Memory mode.
• Run the latest firmware on your Eye-Fi card.
To Next Page
Loading...
