Pentax Optio WG-2GPS - Page 108

106
3
Taking Pictures
You can register frequently used functions on the four-way controller. Using this
function, you can directly set the functions by pressing the four-way controller
without displaying the menu in capture mode.
In [Fn Setting], Still Picture Capture Mode and C (Movie) mode have different
settings. To execute [Fn Setting] in C mode, press the MENU button in C mode
in step 1 on page p.105.
3 Use the four-way controller (23)
to select [Fn Setting].
4 Press the 4 button.
The [Fn Setting] screen appears.
5 Use the four-way controller (23)
to select a key you want to assign
a function to.
6 Press the four-way controller (5).
A pull-down menu appears.
7 Use the four-way controller (23)
to select the function you want to
register.
8 Press the 4 button.
The setting is saved.
Registering Frequently Used Functions (Fn Setting)
This function is activated only when you assign the [Fn Setting] to the Green
button.
Recorded Pixels
Quality Level
White Balance
MENU
Cancel
OK
OK
Green Button
WB
+
+
+
+
Voice Recording
Green Mode
Fn Setting
Movie
Recorded Pixels
EV Compensation
Quality Level
White Balance
MENU
Green Button
WB
+
+
+
+
Fn Setting
Recorded Pixels
EV Compensation
Quality Level
White Balance
MENU
OK
OKCancel
Green Button
WB
+
+
+
+
ISO
AF
Focusing Area
Sensitivity