38
1
Getting Started
• Make sure that the camera is turned off before connecting or disconnecting
the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the AC
adapter to the camera are inserted securely. Data may be lost if either
becomes disconnected while data is being recorded on the SD Memory
Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.3)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter kit K-
AC117 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright on the
table because the cord from the DC coupler comes out of the bottom of the
camera.
• Do not use excessive force when sliding the battery/card cover open and
closed because the waterproof packing may peel off. If the packing is not
in the correct position, the camera will not be waterproof.
To Next Page
Loading...
Need help?
General
