-30-
<Example of the above setting>
When the wheel speed exceeds 20 km/h after the vehicle leaves the pit, logging is
started.
When the measurement laps are finished, the wheel speed drops to below 20 km/h on
the pit road, and then 20 seconds have elapsed, logging is automatically stopped.
* Do not turn off the power without stopping the logging. The logging data will be
damaged.
* To stop logging manually, press the CLEAR key.
* To automatically end logging faster when returning to the pit, set a shorter time.
※ Be sure to stop logging when entering the pit.
※ If the vehicle returns to the course within the set time even after sliding off the
course and slowing to below the set speed, logging is not stopped.
To Next Page
Loading...