52
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
B3 Formwork Utilisation
Formwork Alignment
Inclination Adjustment with the
Adjustable Brace CB 164-224
The required inclination of the formwork
is achieved by altering the Adjustable
Brace CB 164-224 (3.1).
Depending on the rotational direction,
the formwork moves forward or retracts.
(Fig. B3.06)
By placing a spirit-level on the TRIO
formwork struts or on a VARIO
formwork girder, exact adjustment
is possible.
Horizontal Adjustment of a VARIO
Element
Strongbacks must remain in the same
position.
Moving
1. Loosen the Waler Fixation-2 (4.4)
until the element can be moved.
2. Move the element into the correct
position by hand or by using a piece
of timber as a lever.
3. Tighten the Waler Fixation.
(Fig. B3.07)
Fig. B3.06
Fig. B3.07
3.1
4.4
AuV CB 240 EX.indb 52 29.06.16 09:45
To Next Page
Loading...
