Peri CB 240 - Ladder Assembly

40
1.5 – 3.0 2.0 – 3.0 3.3 – 4.9 3.8 – 5.4
3.65 4.15 5.45 5.95
14.1 126431 1 1 1 1
15.10 103724 1 1
1)
1 1
1)
15.2 051410 2 2 3 3
15.6 051450 1 1 1 2
104132 – – 1 –
15.4 109105 1 1 1 1
15.5 103718 2 – 2 –
14.1 110608 1 1 1 1
15.1 051420 1 1 1 1
15.2 051410 1 1 2 2
15.6 051450 1 1 1 2
104132 – – 1 –
15.4 109105 1 1 1 1
15.5 103718 2 – 2 –
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
B1 Work on the Construction Site
Ladder Assembly
Overview
Mounting of ladder is dependent on the
position of the finishing platform.
Parts list for ladder, see Table 1 – assem-
bly of hatch, see A2.
Fig. B1.46
≥ 150
Fig. B1.47
15.1
14.1
14.1
15.2
15.5
15.2
15.2
15.5
15.10
15.4
15.4
15.6
15.6
h
B
h
B
h
NLB
h
NLB
Table 1
Parts list for ladder access
2)
Attach End Ladder 180/2 in second rung.
Alternatively, the Sliding Hatch Cover (Item no. 051430) can be used. The cut-out in the planking must be adapted accordingly. Details are availa-
ble on request.
1)
Working platform – finishing platform spacing h
NLB
[m]
Item no.
Hatch 55 x 60-2, foldable (Fig. B1.46)
End Ladder 180/2
Ladder 180/6, galv.
Ladder Safety Cage 150, galv.
Concreting height h
B
[m]
Description
Parts List
Ladder Safety Cage 75, galv.
Ladder Base 30, galv.
Hatch 55 x 60, foldable
2)
(Fig. B1.47)
Ladder 220/6
Ladder 180/6, galv.
Ladder Safety Cage 150, galv.
Ladder Safety Cage 75, galv.
Ladder Base 30, galv.
Ladder Hook, galv.
Ladder Hook, galv.
AuV CB 240 EX.indb 40 29.06.16 09:45