Adjustment
13.04.24 Roller-presser pressure
Requirement
The material must be fed reliably. No pressure marks may be made on the material.
1
+
-
Fig. 13 - 23
● Adjust the roller-presser pressure with screw 1 in accordance with the requirement.
Screw 1 is underneath a cover.
When the roller-presser pressure is low, the lowering speed of the roller-
presser can be increased by turning on the function ROLLER-PRESSER DE-
ENERGIZER. See chapter 11.08 Summary of the functions in the input
menu.
13 - 28
To Next Page
Loading...
