8:13
Select line positioning (F)
Touch the select shape line positioning icon (F) to
open a pop-up. You can choose to place the objects
on the top of the baseline, or on the baseline or
under the baseline. The selected positioning will
affect all objects on the shape.
Select side positioning (G)
Select which side of the objects that shall be
positioned on the baseline. Touch the select side
positioning icon (G) to open a pop-up. You can
choose to place the bottom, top, right or left side of
the objects along the baseline. The selected setting
will affect all objects on the actual shape.
Select design angle (H)
Decide how to align the objects on the baseline.
Touch the select design angle icon (H) to toggle
between objects placed parallel to the baseline or
to keep the current angle. The setting affects all
objects on the shape.
F
H
G
Embroidery mode - edit
To Next Page
Loading...
