Philips DV910VHS98 - Automatic Channel Setup

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4
5
6
7
8
9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0
+
10
2
1
VCRDVD
E
B
OK
D
H/
LK
/G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO
ANGLESUBTITLE
F
Automatic Channel Setup (cont’d) 19
Reviewing Memorized Channels
To see which TV channels the DVD/VCR has memorized,follow the
steps below.
● Before you begin,place the DVD/VCR in VCR mode.Press the
OUTPUT SELECT button so that the green VCR OUTPUT light
appears on the front of the DVD/VCR.Press the VCR/TV button
so that the VCR/TV light appears on the front of the DVD/VCR.
3
Press the Play B button or the Stop C button to select CH
MEMORY REVIEW, then press the Fast Forward g but-
ton.A list of memorized channels will appear on the screen.
● If all the memorized channels don’t fit on the screen,press the
Fast Forward g button to see the remaining channels.Then
press the Rewind h button to return to the first screen of
channels.
● If you do not press any buttons within 10 seconds,you will either
go to the next screen of channels or you will return to the previ-
ous menu.
4
Press the DISPLAY/STATUS/EXIT button once or twice
to exit.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the Play B button or the Stop C button to select
TUNER SET UP,then press the Fast Forward g button.
SELECT op CHOOSE B
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
TO END PUSH EXIT
2-3
4
1
DV910(H9100).QX33 01.8.9 10:26 AM Page 19