Philips DV910VHS98 - S-Vhs Quasi Playback (Sqpb); Playing a Video Cassette Tape

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4
5
6
7
8
9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0
+
10
2
1
VCRDVD
E
B
OK
D
H/
LK
/G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO
ANGLESUBTITLE
F
32 Playing a Video Cassette Tape
• If the tape you want to play is
already in the DVD/VCR,make sure
the DVD/VCR power is on and the
DVD/VCR is in VCR mode and VCR
position.(The green VCR OUTPUT
light and the VCR/TV light will appear
on the front of the DVD/VCR.) Then
press the Play B button.
• Other tape playback options and
features are on pages 41-48.
• When you play a tape recorded in
S-VHS format on this unit,you can
not get the high resolution that
would be available on an S-VHS
VCR.Noise lines (black and white
streaks) may appear on the picture.
• If REPEAT PLAY is ON,playback will
begin automatically,even when the
record tab is intact.Details are on
page 41.
Helpful Hints
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4,whichever chan-
nel the CH3/CH4 switch on the back of the DVD/VCR is set to.
Or,if you connected the DVD/VCR to the TV using audio and
video cables,select the correct audio and video in channel at the
TV.Details are on page 12.
2
With the DVD/VCR power off, insert a tape in the cas-
sette compartment of the DVD/VCR.The POWER,green
VCR OUTPUT,VCR/TV and CST.IN lights will appear on the front
of the DVD/VCR.If the tape’s record tab has been removed,play-
back will start automatically.
If the DVD/VCR power was on already,press the OUTPUT
SELECT button to put the DVD/VCR in VCR mode.The green
VCR OUTPUT light will appear on the front of the DVD/VCR.
6
After the tape stops,press the STOP/EJECT button on
the DVD/VCR to remove the tape.
3
If playback does not start automatically, press the VCR
button, then press the Play B button.
4
Press the Stop C button to stop playback.
5
Press the Rewind h button to rewind the tape.
1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
4
5
S-VHS Quasi Play Back (SQPB)
This unit allows you to view a tape recorded in S-VHS format.A
tape recorded in S-VHS format will play the same as a tape record-
ed in normal format.This unit detects whether the tape is recorded
in S-VHS format or in normal format.
VCR
3
6
Press STOP/EJECT on the
DVD/VCR.
DV910(H9100).QX33 01.8.9 10:26 AM Page 32