1
Press the VCR button, then press the MENU button.
Follow the steps below to change the language of the VCR on-
screen displays and menus.
● Before you begin,place the DVD/VCR in VCR mode.Press the
OUTPUT SELECT button so that the green VCR OUTPUT light
appears on the front of the DVD/VCR.Press the VCR/TV button
so that the VCR/TV light appears on the front of the DVD/VCR.
2
Press the Play B button or the Stop C button to select
VCR SET UP, then press the Fast Forward g button.
3
Press the Play B button or the Stop C button to select
LANGUAGE,then press the Fast Forward g button.
4
Press the Play B button or the Stop C button to select
English or Spanish (ESPAÑOL) on-screen displays and
menus.
5
Press the DISPLAY/STATUS/EXIT button.
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
SELECT op CHOOSE B
→ REPEAT PLAY OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
TO END PUSH EXIT
• If you accidentally select Spanish
and need English:
1.Press the VCR button,then press the
MENU button.
2.Press the Play B button or the Stop
C button to select PREPARE EL
VCR,then press the FastForward
g button.
3.Press the Play B button or the Stop
C button to select LENGUAJE,then
press the Fast Forward g button.
4.Press the Play B button or the Stop
C button to select ENGLISH.
5.Press the DISPLAY/STATUS/EXIT
button.
Helpful Hint
SELECT op
→ ENGLISH ON
ESPAÑOL
MAKE SELECTION OR
TO END PUSH EXIT
To Next Page
Loading...
