Philips DV910VHS98 - Daylight-Savings Time 21

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4
5
6
7
8
9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0
+
10
2
1
VCRDVD
E
B
OK
D
H/
LK
/G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO
ANGLESUBTITLE
F
1
Press the VCR button, then press the MENU button.
2
Press the Play B button or the Stop C button to select
SET CLOCK, then press the Fast Forward g button.
4
Press the DISPLAY/STATUS/EXIT button.
SET CLOCK
→ SET CLOCK
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SET CLOCK
SET CLOCK
→ DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
Daylight-Savings Time 21
You may program the DVD/VCR so the VCR clock will automati-
cally move forward one hour in April and turn back one hour in
October.Daylight-Savings Time is ON when you receive your
DVD/VCR.Turn Daylight-Savings Time ON or OFF by following
the steps below. Before you begin:
● Set the clock.Details are on page 20.
● Before you begin,place the DVD/VCR in VCR mode.Press the
OUTPUT SELECT button so that the green VCR OUTPUT light
appears on the front of the DVD/VCR.Press the VCR/TV button
so that the VCR/TV light appears on the front of the DVD/VCR.
3
Press the Play B button or the Stop C button to select
DAYLIGHT SVG TIME.Then, press the Fast Forward g
button so that OFF (or ON) appears beside DAYLIGHT
SVG TIME.
2-3
4
1
DV910(H9100).QX33 01.8.9 10:26 AM Page 21