EasyManua.ls Logo

Philips DV910VHS98 - Rerecording (Tape Duplication)

Philips DV910VHS98
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Make the connections shown above.
40 Rerecording (Tape Duplication)
3
DVD/VCR 2 will record your tape. Insert a blank tape in the cas-
sette compartment of DVD/VCR 2.The DVD/VCR must be in
VCR mode and VCR position.(The green VCR OUTPUT light and
the VCR/TV light will appear on the front of the DVD/VCR.)
4
Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on DVD/VCR 2 is set to.
5
Point the remote control at DVD/VCR 2. Press the VCR but-
ton,then press the Number buttons 0,0,1 or 0,0,2. (See
Helpful Hints at right.)
6
Press the SPEED button to select SP or SLP at DVD/VCR 2.
7
Press the VCR PLAY button on DVD/VCR 1 and the VCR
REC(ord)/OTR button on DVD/VCR 2 at the same time.
To stop recording,press the STOP/EJECT button on DVD/VCR 1,
then press the STOP/EJECT button on DVD/VCR 2.
DVD/VCR 1
Playing unit
DVD/VCR 2
Recording unit
2
DVD/VCR 1 will play your tape.Put a prerecorded tape into the
cassette compartment of DVD/VCR 1.The DVD/VCR must be
in VCR mode and VCR position.(The green VCR OUTPUT light and
the VCR/TV light will appear on the front of the DVD/VCR.)
1.Audio cables from DVD/VCR AUDIO OUT Jacks of
DVD/VCR 1 to AUDIO IN Jacks of DVD/ VCR 2
2.Video cable from DVD/VCR
VIDEO OUT Jack of DVD/VCR 1
to VIDEO IN Jack of DVD/VCR 2
3.RF coaxial cable from the ANT-OUT
(Antenna Out) jack of DVD/VCR 2
to the TVs ANTENNA IN Jack
• If you use the AUDIO and VIDEO IN
Jacks on the back of DVD/VCR 2,
press Number buttons 0,0,1 at
step 5.AV REAR will appear on the
TV screen.
• If you use the AUDIO and VIDEO In
Jacks on the front of DVD/VCR 2,
press Number buttons 0,0,2 at
step 5.AV FRONT will appear on
the TV screen.
• Unauthorized recording of copyright-
ed television programs,video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
• If a program has copyright protec-
tion,it may not record clearly.
These instructions show you how to
copy tapes using two DVD/VCRs like
yours. Different VCRs may operate
differently.
You cannot record DVD material
onto a video cassette tape using a
single unit.
Helpful Hints
The instructions on this page show you how to copy tapes.The illustration uses two DVD/VCRs.Different
VCRs may operate differently.To duplicate a tape, make the connections shown,then follow steps 1-7.
VCR
DV910(H9100).QX33 01.8.9 10:26 AM Page 40

Table of Contents

Related product manuals