Philips DV910VHS98 - A-B Repeat Playback (Discs) 61

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4
5
6
7
8
9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0
+
10
2
1
VCRDVD
E
B
OK
D
H/
LK
/G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO
ANGLESUBTITLE
F
A-B Repeat Playback (Discs) 61
• A-B Repeat playback is not avail-
able with some DVDs.
• With DVDs,the entire A-B repeat
section must be within a single
Title.
• With Audio CDs, the entire A-B
repeat section must be within a
single Track.
• Point B must be later on the Disc
than Point A.
• Pressing the Stop C button will
cancel A-B Repeat Playback.
Helpful Hints
You can play a section of an Audio CD or DVDrepeatedly.Follow
these steps to set up the section that you want to play over and
over.
● Before you begin,place the DVD/VCR in DVD mode.
Press the OUTPUT SELECT button so that the red DVD OUT-
PUT light appears on the front of the DVD/VCR.
1
Press the DVD button.
2
Press the Play B button to play the Disc to the point at
which you want repeated playback to begin.
3
Press the A-B REPEAT button to set the starting point (A).
Repeat A will appear on the DVD/VCR’s display panel and on the TV
screen briefly.
3-5
2
4
DVD AUDIO CD
1
Repeat
[A – ]
4
Play or fast forward the Disc to the point at which you want
repeated playback to end,then press the A-B REPEAT but-
ton again.
Within a few seconds,the section will begin to play.The segment will
play over and over until you cancel the A-B Repeat feature.REPEAT
A-B will appear on the DVD/VCR’s display panel and on the TV
screen briefly.
Repeat
[A–B]
5
To cancel A-B Repeat Playback, press the A-B REPEAT but-
ton so that Repeat [Off] appears on the TV screen.Regular
Disc playback will resume.
Repeat
[Off]
DV910(H9100).QX33 01.8.9 10:27 AM Page 61