44
Multi-Channel Television Sound
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on page 10 and 14.You
will use the red and white AUDIO OUT jacks on the DVD/VCR.
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio
(usually, that means your program is recorded in a second language). Of course, your DVD/VCR will play
tapes recorded in monaural (single-source) sound as well.
Your DVD/VCR also will record on a video cassette in Hi-Fi stereo or in second audio, so when you play
that tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then
follow the directions on page 45 to record in stereo or second audio, or follow the directions on page 46
to play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear
when you press DISPLAY twice.
If SAP or STEREO appears, the program is available in second audio or stereo.
Even though a program is available in second audio or stereo, you must
program the DVD/VCR to receive or record the program. Follow the directions
on page 45.
This display is not available during tape playback.
STOP 5:40 PM
CH 02
STEREO
SAP
SLP
To Next Page
Loading...
