12 Temperature Caring For Your Temperature Cables and Probes
136
Disabling the Temperature Function
To turn off the Temperature function, disconnect the temperature cable from the HeartStart MRx
port. The message Te m p (or the label currently activated) unplugged. Turn off Temp? appears. Select Yes
and press the Menu Select button.
Should the temperature cable get disconnected accidentally or if the probe and cable separate, the
message Temp u n p l u g ged. Tu r n of f Te m p ? appears to notify you of the disconnection. To continue
monitoring temperature, select No and press the Menu Select button. Reconnect the temperature cable
to restart the temperature monitoring function. See “Turning Parameters On/Off” on page 18.
Caring For Your Temperature Cables and Probes
Refer to the manufacturer’s instructions for care and cleaning of your cables. Inappropriate treatment
of the cables will reduce their lifetime.
Troubleshooting
If your HeartStart MRx does not operate as expected during temperature monitoring, see Chapter 20,
“Troubleshooting”.
To Next Page
Loading...
