16 Q-CPR and Data Capture Preparing to Use Q-CPR
168
Applying Multifunction Electrode Pads
To apply pads to the patient:
1 Check the expiration date that appears on the pads package.
2 Inspect the packaging for any damage.
3 Connect the pads connector to the Pads/CPR cable. See Figure 78.
Figure 78 Pads Connection
4 Apply the pads to the patient in the anterior/anterior position as shown on the pads package.
CAUTION Philips multifunction defib electrode pads are required to measure ventilation activity, as well as
acquire an ECG signal and deliver a shock, as appropriate.
WARNING Anterior-posterior pad placement should not be used with the Q-CPR option.
To Next Page
Loading...
