16 Q-CPR and Data Capture Preparing to Use Q-CPR
166
Connecting the Compression Sensor to the Pads/CPR Cable
To connect the Compression Sensor to the Pads/CPR cable:
1 Align the key marker on the Compression Sensor cable with the key marker on the receptacle end
of the Pads/CPR cable as shown in Figure 75. As a time saving measure, you may choose to always
keep your Compression Sensor cable pre-connected to the Pads/CPR cable.
2 Push until you hear it click into place.
Figure 75 Attaching the Compression Sensor to the Pads/CPR Cable
Compression
Sensor Cable
Pads/CPR
Cable
To Next Page
Loading...
