Philips HeartStart MRx - Printing Events

Printing Events 18 Data Management
213
Printing Events
The HeartStart MRx can be configured to print automatically when certain events occur. Table 53 lists
these events and the length of the strip printed, depending on whether the printer is configured to
print real-time or with a 10-second delay.
Table 53 Printed Strip Lengths
Event Real-Time
Strip Length
Delayed Strip Length
HeartStart MRx charges to
deliver a shock.
Continuous 10 seconds just prior to charging, plus
continuous printing through the charge
duration.
Shock delivered 12 seconds 10 seconds just prior to shock, plus 12
seconds after shock.
Shock failed 12 seconds 10 seconds just prior to the message
No
Shock Delivered
, plus 12 seconds after
the message.
Alarm condition 15 seconds (10 seconds of pre-
alarm data and 5 seconds of
post alarm data when specified
alarm type occurs.
Same as real-time strip.
Mark Event
button
pressed
6 seconds from the start of the
annotation text or from the
time the Events menu is
removed from the display.
10 seconds prior to the Mark Event
plus 6 seconds from the start of the
annotation text or from the time the
Events menu is removed from the
display.