18 Data Management Copying from Internal Memory
204
Copying from Internal Memory
To copy Event Summaries and 12-Lead ECG Reports stored in internal memory to a data card:
1 Insert a data card, see “Installing the Data Card” on page 46.
2 Turn the Therapy Knob to either Monitor, Pacer or Manual Defib.
3 Press the Menu Select button.
4 Using the Navigation buttons, select Other and press the Menu Select button.
5 Select Data Management and press the Menu Select button.
6 Press the Menu Select button to acknowledge the message, Leaving Normal Operational Mode.
7 Use the [Prev Item] and [Next Item] soft keys to select an Event Summary.
8 Press the Menu Select button to display the Data Management menu.
9 Select Copy and press the Menu Select button. The message, Copying Patient Data, is displayed
while the Event Summary and any 12-Lead Reports are copied to the data card.
NOTE Do not remove the external data card from the HeartStart MRx while the device is copying 12-lead
reports.
Viewing and Erasing the Data Card
The contents and status of your data card are conveniently available for viewing. To display data card
information:
1 Turn the Therapy Knob to either Monitor, Pacer or Manual Defib.
2 Press the Menu Select button.
3 Using the Navigation buttons, select the Other menu and press the Menu Select button.
4 Select Data Management and press the Menu Select button.
5 Press the Menu Select button to acknowledge the message, Leaving Normal Operational Mode.
6 Press the Menu Select button to display the Data Management menu.
7 Select View Data Card and press the Menu Select button.
[Prev Page] and [Next Page] soft keys appear to navigate to additional display pages.
Use the Erase Card menu entry to delete the contents of the data card.
To Next Page
Loading...
