18 Data Management Marking Events
212
Marking Events
The Mark Event button allows you to annotate the Event Summary and the ECG strip at the
point in time the button is pressed. If configured, pressing the Mark Event button prints a 6-second
ECG strip. Depending on configuration, the ECG strip is either printed real time, or prepended with
the previous 10 seconds of data leading up to the marked event.
Once pressed, the Mark Event label in the upper left corner of the display changes to Select Event and
the Mark Events menu is displayed (see Figure 83).
Figure 83 Mark Events Menu
Use the Navigation buttons to select the desired event and press the Menu Select button.
The ECG strip is annotated with the mark event
symbol and the selected annotation. If an
annotation item is not selected within five seconds after the Mark Event button is pressed, only the
generic mark event
symbol will appear on the ECG strip.
The marked event is stored in the Event Summary.
NOTE Entries on the Mark Events menu are as configured. Changes are made using the Configuration menu.
ET Access
Mark Events
IV Access
Epinephrine
Lidocaine
Atropine
Morphine
Nitroglycerin
Aspirin
Other
To Next Page
Loading...
