Phoenix Contact FL SWITCH 2005 - Figure 5-39 SFP Diagnostics Web Page

FL SWITCH 2000
56
PHOENIX CONTACT 107065_en_01
5.2.3.10 SFP Diagnostics
Figure 5-39 “SFP Diagnostics” web page
Here you will find an overview of the SFP ports.
Interface/Port: the ports that can be used with SFP modules are displayed here. Clicking on
a port number opens the port configuration for that port.
Type: the type of SFP module used is displayed here. If no SFP module is inserted, “NO
SFP” is displayed.
Serial No: the serial number of the SFP module used is displayed in this column.
RX Power (dBm): the incoming power level is displayed in this column.
TX Power (dBm): the outgoing power level is displayed in this column.