FL SWITCH 2000
70
PHOENIX CONTACT 107065_en_01
Auto Query Ports: here you can set whether automatic selection of additional query ports is
activated. Ports are automatically integrated in every multicast group. In the case of redun-
dancy switch-over, the multicast packets are not blocked because the ports required are al-
ready members of the multicast group.
Clear AQP: button for deleting the ports that are automatically assigned to the groups.
Static Query Ports: select which ports are static query ports.
Clicking on the “Current multicast groups” link opens the “Current Multicast Groups” web
page as a pop-up.
Figure 9-2 “Current Multicast Groups” web page
The device can manage up to 50 dynamic multicast groups.
To Next Page
Loading...
