Title Service Manual, LPCR2 Page
Service Product Drawing
3323299
B
Released State Date 11/14/2017
7000545 Revision A
4. If a wrong password has been entered three times, the login account will be disable. The customer will need to
call customer service to unlock the login account.
Connectivity
Overview: There are four main steps to connect the CR2 to LIFELINK or LIFENET System:
1. Download and install Wi-Fi Configuration Tool from LIFELINK or LIFENET to the computer.
2. Use Wi-Fi Configuration Tool to set up and store CR2 Wi-Fi settings.
3. Check in CR2 to LIFELINK or LIFENET
4. Check device readiness status from LIFELINK or LIFENET website
NOTE: CR2 supports 2.4 GHz Wi-Fi frequency. It does not support 5 GHz frequency.
Download and Install Wi-Fi Configuration Tool
Overview: Wi-Fi Configuration Tool is a PC application made by Physio-Control to help customers connect Physio-
Control devices to the Wi-Fi network so that the devices can communicate with LIFENET system. This procedure
describes how to download and install Wi-Fi Configuration Tool.
Prerequisites:
• LIFENET or LIFELINK user account.
• Windows Computer
• Internet access available from Computer
Required Time:
• Less than 10 minutes is required to download and install Wi-Fi Configuration Tool.
Steps:
1. Login to LIFELINK or LIFENET website.
2. Download the Wi-Fi Configuration Tool.
• In LIFELINK, select Resource Center, and then select Wi-Fi Configuration Tool, and click on
to download.
• In LIFENET, select Assets > Wi-Fi Configuration Tool Applications. Click on Add or Update Wi-Fi
Configuration Tool. Under Description, click on Wi-Fi Configuration Tool (32 or 64-bit) to
download.
3. When download completes, right click on “WCT.#.#.#.###_Setup.exe” from your download folder, and select
“Run as administrator”.
4. Wait for the following screen to appear, select language, and then click Next.
To Next Page
Loading...
