Title Service Manual, LPCR2 Page
Service Product Drawing
3323299
B
Released State Date 11/14/2017
7000545 Revision A
LIFELINKcentral™ AED Program Manager
website
https://lifelink-lt.lifenetsystems.com
https://lifelink-lu.lifenetsystems.com
https://lifelink-mt.lifenetsystems.com
https://lifelink-nl.lifenetsystems.com
https://lifelink-nz.lifenetsystems.com
https://lifelink-no.lifenetsystems.com
https://lifelink-pl.lifenetsystems.com
Portugal / República Portuguesa
https://lifelink-pt.lifenetsystems.com
https://lifelink.lifenetsystems.com
https://qa.lifenetsystems.com
https://lifelink-ro.lifenetsystems.com
新加坡
https://sg.lifenetsystems.com
Slovak Republic / Slovenská
Republika
420 602 565 977 https://lifelink-sk.lifenetsystems.com
https://lifelink-si.lifenetsystems.com
https://lifelink-es.lifenetsystems.com
https://lifelink-se.lifenetsystems.com
Switzerland / Schweiz / Suisse
https://lifelink-ch.lifenetsystems.com
https://ae.lifenetsystems.com
https://lifelink-gb.lifenetsystems.com
https://lifelink.lifenetsystems.com
https://lifelink.lifenetsystems.com
Service Personnel Qualifications
Service technicians must be properly qualified and thoroughly familiar with the operation of the LIFEPAK CR2
defibrillator. They must meet at least one of the following requirements (or the equivalent):
• Physio-Control Service Depot technicians
• Physio-Control Field Service Representatives
• 3
rd
Party Service Providers that have service agreements with Physio-Control
Service Information
The CR2 will not be opened for repair activities. Parts replacement is limited to the supply and replacement parts listed
in Supply and Replacement Parts
Before attempting to clean or service the device, the service technician should be familiar with the information provided
in Preventive Maintenance
.
A qualified service technician (see Service Personnel Qualifications
) should inspect any device that has been
dropped, damaged, tampered, or abused to verify that the device is operating within performance standards listed in
the Performance Inspection Procedures (PIP), and that the leakage current values are acceptable.
To obtain service and maintenance for your device, contact your local Physio-Control service or sales representative.
In the USA, call Physio-Control Technical Support at 1.800.442.1142. Outside the USA, contact your local Physio-
Control representative. When you call Physio-Control to request service, provide the following information:
• Model number and part number
• Serial number
• Observation of the problem that led to the call