Title Service Manual, LPCR2 Page
Service Product Drawing
3323299
B
Released State Date 11/14/2017
7000545 Revision A
Preface
This Service manual describes how to support the following tasks for the LIFEPAK CR2 defibrillator:
• Connecting to LIFELINK or LIFENET System
• Confirming connectivity
• Checking self-test results
• Changing device setup options
• Updating device software
• Post AED event support
• Replacement Procedure
• Troubleshooting common issues
• Preventive Maintenance
Another publication, the LIFEPAK CR2 Defibrillator Operating Instructions, is for use by physicians, clinicians, and
emergency care providers. The operating instructions provide step-by-step instructions for use, as well as operator-
level testing and maintenance.
Disclaimer
All the screenshots or pictures in this document are for the example only; they are subject to change without matching
the latest versions of software.
Trademarks
LIFEPAK, LIFENET, QUIK-STEP, LIFELINKcentral, cprCOACH, cprINSIGHT, Shock Advisory System, SAS, and
ClearVoice are trademarks of Physio-Control, Inc. CODE SUMMARY, CODE-STAT, and DT EXPRESS are
Trademarks of Physio-Control, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation in the
US and/or other countries. Specifications are subject to change without notice.
Definitions, Acronyms, and Abbreviations
802.11
Commonly known as "Wi-Fi," the IEEE 802.11 standards provide the wireless counterpart to
Ethernet, and the Wi-Fi Alliance certifies products. The versions have the suffixes 11a, 11b,
11g, 11n and 11ac; the latest being 802.11ac. The original 20 MHz channel was increased
to 40 MHz in 11n and to 80 and 160 MHz in 11ac.
AED Automated External Defibrillator
ASR
Account Support Representative - a Physio-Control support team member dedicated to
supporting customers with a full AED support service contract.
CR2 LIFEPAK CR2 Defibrillator
DTx DT Express™ Data Transfer Software
FSR Field Service Representative (services products in the Field)
To Next Page
Loading...
