43
4.4 Programming
4.4.1 Read and write CV’s
The screen for decoder programming can be reached with the main menu button
.
On this screen you can read and write decoder CVs.
Read CV’s
To read a CV’s value you rst have to enter the related CV.
Touch the line with the CV and enter the number.
Then remove the keyboard (free area on display or back-button) and press “READ”.
The result will be displayed.
While reading CVs in programming mode the locomotive may move a little.
4.4.2 CV Write CV’s
Programming new values is very similar to reading them.
First enter the CV number you want to change.
Conrm on the keyboard with “next” (blue, bottom right) and the cursor will jump to the value entry.
Enter the desired value, conrm with “done” or remove the keyboard by clicking on a free area or by
using the back button.
Now press “WRITE” to change the CV.
During this process the locomotive may move a little.
To Next Page
Loading...
