PIKO SmartControl - Page 9

9
PIKO SmartBox
®
technical specication:
DCC central station with RailComPlus*
• All DCC modes (14, 28, 128 speed steps, LGB serial), long and short addresses are supported
• Up to 16,384 locomotives can be congured and controlled
• Up to 28 individually assignable functions per locomotive
Wireless LAN receiver for the PIKO SmartController
®
*
• Supports simultaneous use of up to 32 wireless PIKO SmartController
®
• Standalone mode: The PIKO SmartBox
®
will create a wireless network for the controllers, no internet
access
• Access point: The PIKO SmartBox
®
connects to your home network
• WLAN module for connecting to all common WLAN access points
• Compliant with all relevant IEEE WLAN standards. Suitable for use in America and Europe
Ethernet-Port*
• Connection to home network for software updates and computer interface
Integrated main track booster, up to 5 A output (adjustable)
• suitable for N, TT and H0 scale
Integrated programming track output for decoder programming
• full support of all DCC service mode commands
• import of all decoders used by PIKO to date (excludes old AnDi decoders!)
• import of locomotives possible
Loconet-T extension port**
• wired controllers
• occupancy detectors
**Please note: This function will follow per Update.
Power supply
• DC 5.5 mm / 2.1 mm socket for external regulated DC power supply
• low voltage monitoring and auto shut-off
* a detailed explanation of the terms used above can be found at the end of the manual