DVD/CD
DVD/CD
DVD/CD
The pickup could not be moved.
Other causes. *2
*1 For E-8301 and E-8302 errors, it is very likely that the DVD/CD drive is defective.
*2 Failure in ATAPI communication between the main CPU of the control unit and the DVD/CD drive is suspected.
TOC read error
The program could not be written to the audio
DSP upon power-on.
E-7201
E-8301
The specified address could not be searched for.
Error code
Error type
E-6002
Audio DSP download error
Content
Applicable
media
The TOC data could not be read from a disc.
The address could not be read.
A disc could not be stopped properly.*2 Stop error*1
A data error or decoding (expansion) error was generated in
compressed-audio-file data (MP3/AAC), even though such
data are supported.
Writing of audio data in the buffer failed
(processing at the SDRAM and main
memory of the drive unit).
Playback error *1 The focus servo could not be closed.
A mechanical error (timeout) was generated during disc
loading or unloading. (The expected switch was not pressed
within the time allotted when the loading mechanism was
prepared to be moved to a certain direction.)
The track registered at the library (database) or playlist has
been already deleted from the USB storage device.
Although the filename extension (MP3/AAC/WAV/AIFF) of
the audio file is correct, the description in the file was in
unsupported format.
E-9101 Loading timeout DVD/CD
E-8306 No audio file USB
Format error
DVD/CD
USB
E-8302
E-8305
E-8304 Decoding error
DVD/CD
USB
E-8303 Buffer write error
DVD/CD
USB
To Next Page
Loading...
