EasyManuals Logo

Piper PA-28-161 Maintenance Manual

Piper PA-28-161
1104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
PIPER AIRCRAFT, INC.
PA-28-161, WARRIOR III
MAINTENANCE MANUAL
PAGE 9
Nov 30/06
1I5
12-10-00
B. Maintain tires at pressure specified in 6-00-00, Chart 1. When checking tire pressure, examine tires
for wear, cuts, bruises and slippage on the wheel. Check that index mark on tire is aligned with
index mark on wheel. Apply Age-Master #1 to tires to protect against ozone attack and weathering
as follows:
(1) Clean oil and grease from all tire surfaces.
(2) Apply single heavy coat using brush at 0.4 - 0.5 fluid ounces per square foot. Cover surface
completely and evenly; allow to dry for 5 - 10 minutes.
(3) Apply second coat per step 2; allow to dry for 20 - 30 minutes before handling.
(4) Remove agent on wheel assembly with cleaning solvent.
(5) Apply as conditions dictate.

Table of Contents

Other manuals for Piper PA-28-161

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Piper PA-28-161 and is the answer not in the manual?

Piper PA-28-161 Specifications

General IconGeneral
ManufacturerPiper Aircraft
ModelPA-28-161 Warrior II
EngineLycoming O-320-D3G
Horsepower160 hp
Seating Capacity4
Wingspan35 ft (10.7 m)
Length24 ft 0 in
Maximum Speed127 knots
Cruise Speed122 knots
Maximum Takeoff Weight2, 325 lb (1, 055 kg)
Fuel Capacity48 US gallons (182 L)

Related product manuals