Adding an address to the Address Book
1. Select the Address Book button in the Shipping tile on the Home screen.
2. Select either the Recipient or Sender tab (whichever is appropriate).
3. Click on the +Add New button. You can select an international country by selecting the drop
down option.
4. At the Add Contact screen, click the Add one address button.
5. Enter the details for the new address in the fields provided on the screen.
6. Click Save when done. You may be prompted to verify the address.
7. The new address is added to your list of addresses.
Changing the sender's address
You can make changes to the current sender's address, add a new sender address, or select a
different sender address from the Address Book as you create a shipping label. You can also make
these changes when adding an address to the Address Book.
To change the sender's address while creating a shipping label:
1. Click on the sender address in the Sender section on the left side at the top of the Choose a
Recipient screen.
2. Select the appropriate option.
l
Edit sender address - Select this to display all the address fields. Type your changes in the
appropriate field(s). If you make changes to street, city, state or ZIPcode (USPS) click on
the Confirm Address button when done.
l
Add new sender address - Select this to add a new sender address. Type in the sender's
address in the fields provided. For USPS, click on the Confirm Address button when done.
l
View all senders - Select to display all the available sender addresses in the address book.
Click on the one you want to use. This then appears in the Sender section.
Creating a label from an address
You can start creating a USPS, UPS or FedEx shipping label within the Address Book. To do this:
SendPro Shipping Solution
Pitney Bowes User Guide April 2022 104
To Next Page
