The default job is special:
l
it is always open, and
l
it is protected so you don't overwrite it easily.
To clear all changes made while running mail and to return to the default job to its original state, select
the Reload job link on the default job tab.
Opening a job
Open a job to access the saved settings within that job.
1. Select the Open a job tab on the Run Mail screen, or select the Jobs button on the Home
screen. The Jobs screen opens with a list of available jobs.
2. Select the job you wish to open. Up to five jobs can be open at the same time.
3. Select OK. A tab for the job opens on the Run Mail screen.
Jobs can also be opened using the optional Barcode Scanner, using barcodes set up with the job
name inside.
Previewing jobs
The Jobs screen lists all the jobs stored on your system.
1. Select the Open a job tab from within the Run Mail screen, or select the Jobs button in the
Mailing tile on the Home screen.
2. The Jobs screen appears with a list of jobs available on your system.
l
If necessary, you can sort the jobs by name, type or creator. Select the appropriate column
heading to change the sort order.
l
Use the up and down arrow buttons to scroll through the list.
Using jobs
Pitney Bowes User Guide April 2022 31
To Next Page
Loading...
