Setting the default job on the Jobs screen
1. Select Jobs in the Mailing tile on the Home screen.
2. Select the job you want to make the default.
3. Select Options then select Make this job the default job.The system gives the selected job
the default icon. The job also appears on the default jobs tab in the Run Mail application.
4. Select OK when done.
Reloading a Job
The Reload job option allows you to reset an edited or modified job to its original state. Use this option
to discard changes you have made to a job.
On the run mail screen:
1. Select the modified job.
Note: An asterisk appears next to job name when it has been edited or modified.
2. Select Reload job.The system reverts to the previously saved version of the job.
Job types
When creating a new job, you can select from the following job types.
l
Select Seal only, no printing if you only want to seal the envelope and do NOT want to apply
postage.
l
Select Date correction when you need to print the correct date on a piece of mail that already
has postage printed on it.
l
Select Postage correction if you do not have the correct amount of postage on a piece of mail.
l
Select Received date and time if you want to print the date or time on incoming mail for record
keeping.
l
Select Graphic ad only if you only want to print a graphic on the envelope.
l
Select Permit if you want to print a permit on a piece of mail.
l
Select Postal if you want to print postage on a piece of mail.
Using jobs
Pitney Bowes User Guide April 2022 35
To Next Page
Loading...
